/* transportable version of the browser program -- 871008 
 * version 0.11 -- with fixes to allow for non-ASCII characters
 * in the document/database file....
 *
 * This program lets a user browse through indices created by
 * the qndxr program....
 *
 * Contact Mark Zimmermann, 9511 Gwyndale Drive, Silver Spring, MD  20910
 * ("science (at) nems.arpa, [75066,2044] on CompuServe, 301-565-2166
 * for further information....
 * 
 * This version contains mods by G. Everhart designed to simplify use
 * a bit. The idea is as follows:
 * The command ` will toggle a "Screen mode" in which the screen will contain
 * 4 regions. Lines 1-7 will show the current index area , lines 8-14 will
 * show the KWIC area, and lines 15-21 will show the current plaintext
 * area. Then lines 22 to end will contain the old "glass tty" display.
 * simple ANSI cursor controls will be used to maximize the number of
 * platforms available to support the code (given I don't have access to
 * a good manual at the moment for curses). Some attempt may be made to allow
 * cursor keys to move in a document. Up and down arrows can reasonably mean
 * moving around within index, KWIC, or fulltext files, and left and right
 * arrows used to switch "levels". This will require a bit of magic to
 * ensure the esc codes actually get read and will be phase 2.
 */


/* commands:
 *
 *    ?            print out helpful info
 *    :            quit program
 *    :fnord       open document file 'fnord' for browsing
 *    >grok        append copy of future output to notes file 'grok'
 *    >            end copying to notes file
 *    'DON.MAC     append comment string 'DON.MAC' to notes file
 *    xyzzy        jump to INDEX item 'XYZZY'
 *    ".012345     take string '.012345' as target for jump
 *    -17          back up 17 lines from here
 *    -            back up one line; same as '-1' command
 *    +23          jump down 23 lines from here
 *    + or <ret>   move down one line; same as '+1' command
 *    .29          print 29 lines from here
 *    =            descend:  INDEX -> CONTEXT -> TEXT display
 *    ^            ascend:  TEXT -> CONTEXT -> INDEX display
 *    *            empty 'working subset' proximity filter (nothing valid)
 *    **           fill 'working subset' (everything valid)
 *    &            add word-neighborhood of current index item to subset
 *    &&           add sentence-neighborhood to subset
 *    &&&          add paragraph-neighborhood to subset
 *    ~            invert (logical NOT) entire working subset
 *    ;            repeat previous command
 *    `		   toggle screen mode
 *    
 */
 

#include <stdio.h>            /* for FILE, printf(), etc. */
#include <strings.h>
#include <ctype.h>

/* -----------------header stuff---------------- */

/* some definitions for the brwsr program...
 * 870805-07-... ^z
 */

/* tell the compiler that we are using Lightspeed C ... mostly so that
 * certain sections of non-transportable code will be activated to
 * compensate for the use of 16-bit int variables in LSC.... */
/* #define LIGHTSPEED */

/* KEY_LENGTH is the number of letters we have in each record.... */
#define KEY_LENGTH    28

/* CONTEXT_LINE_LENGTH is the total length of a key-word-in-context
 * display line.... */
#define CONTEXT_LINE_LENGTH  255

/* CONTEXT_OFFSET is the distance from the start of the context line
 * to where the key word itself begins.... */
#define CONTEXT_OFFSET  30

/* STRLEN is the most characters to allow in a line from the
 * file at one time, and the maximum length of a command line.... */
#define STRLEN  256

/* CMASK masks off characters to avoid negativity problems with funny
 * non-ASCII symbols... */
#define CMASK  0xFF

/* NEIGHBORHOOD is the distance in bytes that defines the proximity
 * neighborhood of a word in the index ... used when defining a
 * subset for proximity searching.... NEIGHBORHOOD * 8 is the
 * compression factor for squeezing the document file down into the
 * array subset[] ...
 * Thus, NEIGHBORHOOD = 32, a good choice, defines a chunkiness of 32
 * characters in making comparisons for proximity determination purposes....
 */
#define NEIGHBORHOOD  32

/* WORD_RANGE, SENTENCE_RANGE, and PARAGRAPH_RANGE define how many chunks
 * of size NEIGHBORHOOD on each side of an item that the neighborhood of
 * each type extends.  Values 1, 10, and 100 work pretty well....
 */
#define WORD_RANGE         1
#define SENTENCE_RANGE    10
#define PARAGRAPH_RANGE  100

/* define a value to help recognize long operations, for which
 * the user should be warned of a likely delay in response ...
 */
#define GIVE_WARNING  200

/* structure of the records in the index key file:
 *    a fixed-length character string kkey, filled out with blanks and
 *        containing the unique alphanumeric 'words' in the document file,
 *        changed to all-capital letters;
 *    a cumulative count of how many total occurrences of words, including
 *        the current one, have happened up to this point in the alphabetized
 *        index.
 *
 *    Obviously, the number of occurrences of the nth word is just the
 *        difference between the nth cumulative count and the (n-1)th
 *        cumulative count.  Also, the (n-1)th cumulative count is a
 *        pointer to the first occurrence of the nth word in the ptr_file
 *        (which holds all the index offset pointers for the document file).
 *
 *    See the index building program "ndxr.c" for further details of the
 *        index structure....
 */
typedef struct
  {
    char kkey[KEY_LENGTH];
    long ccount;
  }  KEY_REC;

/* the pointer records are simply long integers, offsets from the start
 * of the document to the indexed words....*/
#define PTR_REC  long

/* define the values for the three levels that the user may be browsing
 * on:  INDEX is the display of unique words and their occurrence counts;
 * CONTEXT is the key-word-in-context (KWIC) display; TEXT is the full
 * text of the document.  */
#define INDEX    0
#define CONTEXT  1
#define TEXT     2

/* symbolic values for yes/no answers... */
#define TRUE  1
#define FALSE 0

#ifdef unix
#define SUCCESS 0
#else
#define SUCCESS 1
#endif

/* ---------------prototypes------------------- */

/* prototypes for my brwsr functions ...
 * 870805...  ^z
 */

#ifdef LIGHTSPEED

/* in file_utils.c */
void open_files (char cmd[]);
void close_files (void);
void init_items (void);

/* in brwsr.c */
/*  void main (void); */
long main (void);

/* in show_items.c */
void show_current_item (void);
void show_current_index_item (void);
void show_current_context_item (void);
void show_current_text_item (void);

/* in brws_utils.c */
void get_key_rec (KEY_REC *recp, long n);
PTR_REC get_ptr_rec (long n);
long start_of_line (long p);
long next_line (long p);
void beep (void);

/* in do_help/files.c */
void do_help (void);
void do_open (char cmd[]);
void do_redirection (char cmd[]);
void do_comments (char cmd[]);

/* in do_moves_etc.c */
void do_move (char cmd[]);
int make_move (long n);
int move_in_text (long move);
int make_subindex_move (long move);

/* in do_targets.c */
void do_descend (void);
void do_ascend (void);
void do_target_jump (char cmd[]);
int zstrcmp (char *s1, char *s2);
void init_target_item (KEY_REC *rp, char cmd[]);
void do_multiprint (char cmd[]);

/* in do_subset.c */
void do_make_subset (char cmd[]);
void create_subset (void);
void destroy_subset (void);
void do_invert_subset (void);
void do_add_neighborhood (char cmd[]);
void set_neighborhood_bits (int n);
void set_subset_bit (long offset);
int get_subset_bit (long offset);
long count_subset_recs (KEY_REC *this_rec, KEY_REC *prev_rec);

#endif

/* in file_utils.c */
void open_files (char cmd[]);
void close_files (void);
void init_items (void);

/* in brwsr.c */
/*  void main (void); */
long main (void);

/* in show_items.c */
void show_current_item (void);
void show_current_index_item (void);
void show_current_context_item (void);
void show_current_text_item (void);

/* in brws_utils.c */
void get_key_rec (KEY_REC *recp, long n);
PTR_REC get_ptr_rec (long n);
long start_of_line (long p);
long next_line (long p);
void beep (void);

/* in do_help/files.c */
void do_help (void);
void do_open (char cmd[]);
void do_redirection (char cmd[]);
void do_comments (char cmd[]);

/* in do_moves_etc.c */
void do_move (char cmd[]);
int make_move (long n);
int move_in_text (long move);
int make_subindex_move (long move);

/* in do_targets.c */
void do_descend (void);
void do_ascend (void);
void do_target_jump (char cmd[]);
int zstrcmp (char *s1, char *s2);
void init_target_item (KEY_REC *rp, char cmd[]);
void do_multiprint (char cmd[]);

/* in do_subset.c */
void do_make_subset (char cmd[]);
void create_subset (void);
void destroy_subset (void);
void do_invert_subset (void);
void do_add_neighborhood (char cmd[]);
void set_neighborhood_bits (int n);
void set_subset_bit (long offset);
int get_subset_bit (long offset);
long count_subset_recs (KEY_REC *this_rec, KEY_REC *prev_rec);

/* ------------------------main program-------------- */


/* First, define a few external variables to hold:
 *    - pointers to the document, key, pointer, and notes files;
 *    - numbers indicating the current and the minimum/maximum values for:
 *        INDEX item (one line for each unique word in the document);
 *        CONTEXT item (one line for each occurrence of chosen INDEX word);
 *        TEXT item (byte offset from start of file to current line).
 *    - the actual KEY_RECs corresponding to the current INDEX item and
 *        the INDEX item just before that one
 *    - the subset array pointer used for proximity searching, the flag
 *        empty_subset, and the count of how many current records are in
 *        the working subset subset_rec_count
 *    - the level of user operations:
 *        0     means browsing the INDEX
 *        1    means browsing the CONTEXT (key-word-in-context = KWIC)
 *        2    means browsing the TEXT
 *
 * These items are referred to by various routines at scattered
 * locations, and it seems easiest to let them reside in external
 * variables....
 */
 
FILE *doc_file = NULL, *key_file = NULL, *ptr_file = NULL,
        *notes_file = NULL;
long current_item[3] = {0, 0, 0};
long min_item[3] = {0, 0, 0};
long max_item[3] = {0, 0, 0};
KEY_REC this_rec, prev_rec;
long smodct = 0;
long smode = 0;
char *subset = NULL;
int empty_subset = TRUE;
long subset_rec_count = 0;
int level = INDEX;

/* next line was void main()  */
long main()
  {
    char cmd[STRLEN], prevcmd[STRLEN], *gets(), *strcpy();
    void do_help(), do_open(), do_redirection(), do_comments(), do_move(),
        do_make_subset(), do_invert_subset(), do_add_neighborhood(),
        do_descend(), do_ascend(), do_target_jump(), do_multiprint(),
        close_files();
    extern int level;
    extern long smode;
    extern long smodct;
    extern int empty_subset;

    level = INDEX;
    smodct = 0;
    smode = 0;
    empty_subset = TRUE;
    prevcmd[0] = '\0';
    printf ("Greetings, program! ... type '?' for help.\n");
    printf ("Browser version 0.11a by ^z - 871007\n");
    
    while (gets (cmd))
      {
         do_cmd:
         switch (cmd[0])
          {
            case '?':
                  do_help ();
                  break;
            case '\0':
                strcpy (cmd, "+");
                /* <return> is just + */
            case '+':
                /* + or - commands are both moves */
            case '-':
                do_move (cmd);
                break;
            case ':':
                do_open (cmd);
                break;
            case '>':
                do_redirection (cmd);
                break;
            case '\'':
                do_comments (cmd);
                break;
            case '=':
                do_descend ();
                break;
            case '^':
                do_ascend ();
                break;
            case '.':
                do_multiprint (cmd);
                break;
            case '*':
                do_make_subset (cmd);
                break;
            case '&':
                do_add_neighborhood (cmd);
                break;
            case '~':
                do_invert_subset ();
                break;
            case ';':
                strcpy (cmd, prevcmd);
                goto do_cmd;
                break;
            case '"':
                do_target_jump (cmd + 1);
                break;
            case '`':
                smode = 1 - smode;
		smodct = 0;
                break;
	    case '\033':
		switch (cmd[2])
		{
		 case 'A':
                strcpy (cmd, "-");
                do_move (cmd);
		 break;
		 case 'B':
                strcpy (cmd, "+");
                do_move (cmd);
		 break;
		 case 'C':
                do_descend ();
		 break;
		 case 'D':
                do_ascend ();
		 break;
		}
		break;
	    case '\233':
		switch (cmd[1])
		{
		 case 'A':
                strcpy (cmd, "-");
                do_move (cmd);
		 break;
		 case 'B':
                strcpy (cmd, "+");
                do_move (cmd);
		 break;
		 case 'C':
                do_descend ();
		 break;
		 case 'D':
                do_ascend ();
		 break;
		}
		break;
            default:
                do_target_jump (cmd);
                break;
          }
        strcpy (prevcmd, cmd);
      }
  return (SUCCESS);
  }


/* ---------------------brws_utils.c----------------- */

/* miscellaneous utility functions for helping the higher-level routines
 * browse around in indexed files....
 * 870805-13-...  ^z
 */

/* function to get the 'n'th KEY_REC from key_file and store it in the
 * KEY_REC space pointed to by recp ... note that if an illegal value
 * of 'n' is requested, a 'null' KEY_REC is produced....
 */
 
void get_key_rec (recp, n)
  KEY_REC *recp;
  register long n;
  {
    extern FILE *key_file;
    extern long min_item[], max_item[];
    char *strncpy();
    void beep();
    
    if (n < min_item[INDEX] || n > max_item[INDEX])
      {
        strncpy ((char *)recp->kkey, "                    ",
                    KEY_LENGTH);
        recp->ccount = 0;
        return;
      }
    
    if (fseek (key_file, sizeof (KEY_REC) * n, 0) != 0)
      {
        beep ();
        printf ("Fatal error in fseek() getting key record #%ld!\n", n);
        exit();
      }
    
    if (fread ((char *)recp, sizeof (KEY_REC), 1, key_file) == 0)
      {
        beep ();
        printf ("Fatal error in fread() getting key record #%ld!\n", n);
        exit();
      }
  }


/* routine to get the nth pointer record (a long integer) from ptr_file;
 * the pointer record gives the actual offset in the document file of
 * the nth word in the expanded index....
 */
 
PTR_REC get_ptr_rec (n)
  register long n;
  {
    PTR_REC p;
    extern FILE *ptr_file;
    void beep();
    
    if (fseek (ptr_file, sizeof (PTR_REC) * n, 0) != 0)
      {
        beep ();
        printf ("Fatal error in fseek() getting pointer record #%ld!\n", n);
        exit();
      }
    
    if (fread ((char *)&p, sizeof (PTR_REC), 1, ptr_file) == 0)
      {
        beep ();
        printf ("Fatal error in fread() getting pointer record #%ld!\n", n);
        exit();
      }
    
    return (p);
  }


/* Move backwards in document file to find the start of the line of text
 * which has offset p (from start of file) somewhere in that line.
 * However, don't go back beyond STRLEN characters at a time... that
 * is, put a ceiling of STRLEN on the maximum 'length of a line', to
 * avoid pathological input files with no \n's....
 * Do the work by grabbing a buffer full and then scanning back in that,
 * rather than by laboriously lseek() and fgetc() back one character at
 * a time....
 */
 
long start_of_line (p)
  register long p;
  {
    extern FILE *doc_file;
    char buf[STRLEN];
    register long i;
    register int n;
    void beep();

    if (p <= 0)
        return (0L);

    i = p - STRLEN;
    i = ((i < 0) ? 0 : i);
    if (fseek (doc_file, i, 0) != 0)
      {
        beep ();
        printf ("Fatal error in fseek() backing up in document!\n");
        exit();
      }
    if ((n = fread (buf, sizeof (char), p - i, doc_file)) == 0)
      {
        beep ();
        printf ("Fatal error in fread() backing up in document!\n");
        exit();
      }

    while (--n >= 0 && buf[n] != '\n');
    
    return (i + n + 1);
  }


/* scan forward until reaching the beginning of the next line of text;
 * if at or beyond the end of the file, return a pointer to the last
 * character in the file ...
 * Don't go beyond STRLEN characters, however, in scanning forward....
 */

long next_line (p)
  long p;
  {
    register int c, n;
    extern long max_item[];
    void beep();
    
    if (p >= max_item[TEXT])
        return (max_item[TEXT]);
    
    if (fseek (doc_file, p, 0) != 0)
      {
        beep ();
        printf ("Fatal error in fseek() scanning forward in document!\n");
        exit();
      }
    
    for (n = 0; n < STRLEN; ++n)
        if ((c = fgetc (doc_file)) == EOF || c == '\n')
            break;
    
    return (ftell (doc_file));
  }


/* paging James Bond ....
 */

void beep ()
  {
    putchar ('\007');
  }


/* ---------------------do_help/files.c---------------- */



/* function to print out helpful information -- a command summary
 * for the user....
 */

void do_help ()
  {
    printf ("  ?        print this help\n");
    printf ("  :        quit the program\n");
    printf ("  :fnord   open document file 'fnord' for browsing\n");
    printf ("  >grok    open notes file 'grok' and append output\n");
    printf ("  >        close notes file\n");
    printf ("  'DON.MAC append comment 'DON.MAC' to notes file\n");
    printf ("  xyzzy    jump to 'XYZZY' in INDEX\n");
    printf ("  \".123    jump to '.123' in INDEX\n");
    printf ("  -17      back up 17 lines\n");
    printf ("  -        back up one line\n");
    printf ("  +0       print current line\n");
    printf (" <return>  move down one line\n");
    printf ("  +23      move down 23 lines\n");
    printf ("  =        INDEX --> CONTEXT --> TEXT\n");
    printf ("  ^        INDEX <-- CONTEXT <-- TEXT\n");
    printf ("  .9       move down and print out 9 lines\n");
    printf ("  *        create an empty working subset\n");
    printf ("  **       fill the working subset (complete database)\n");
    printf ("  &        add word-neighborhood to subset\n");
    printf ("  &&       add sentence-neighborhood to subset\n");
    printf ("  &&&      add paragraph-neighborhood to subset\n");
    printf ("  ~        invert (logical NOT) entire working subset\n");
    printf ("  ;        repeat previous command\n");
    printf ("  `        Toggle screen mode\n");
  }


/* function to handle a ":" command, to either quit the program or to
 * open a new database for browsing.... display some amusing data
 * about the file that is opened, if successful (total length in bytes,
 * total number of words, and number of unique words in the file)...
 */

void do_open (cmd)
  char cmd[];
  {
    char qcmd[STRLEN];
    extern FILE *doc_file;
    extern long max_item[];
    void destroy_subset (), open_files (), init_items ();
    
    if (cmd[1] == '\0')
      {
        printf ("Quit?\n");
        gets (qcmd);
        if (qcmd[0] == 'y' || qcmd[0] == 'Y')
          {
            printf ("Good-bye ... ^z\n");
            exit ();
          }
        else
          {
            printf ("Cancelled!\n");
            return;
          }
      }
    
    destroy_subset ();
    open_files (cmd);
    if (doc_file == NULL)
        return;
    init_items ();
    printf ("File \"%s\" contains:\n", cmd + 1);
    printf ("%9ld characters\n%9ld total words\n%9ld unique words\n",
        max_item[TEXT] + 1, max_item[CONTEXT] + 1, max_item[INDEX] + 1);
  }


/* function to open or close a notes file ... copies of browser
 * program output gets appended to that notes file as long as it
 * is open, and the user may add comment strings with the '"' command ....
 */

void do_redirection (cmd)
  char cmd[];
  {
     extern FILE *notes_file;
     FILE *fopen ();
     void beep();
     
    if (notes_file != NULL)
         fclose (notes_file);
     
     if (cmd[1] == '\0')
         return;

     if ((notes_file = fopen (cmd + 1, "a")) == NULL)
       {
        beep ();
        printf ("Error opening notes file \"%s\"!\n", cmd + 1);
        return;
       }
  }


/* function to append a comment line to the notes_file... does the job
 * for the '"' command....
 */

void do_comments (cmd)
  char cmd[];
  {
     extern FILE *notes_file;
     void beep();
     
     if (notes_file == NULL)
       {
        beep ();
        printf ("No notes file open!\n");
        return;
       }
     else
        fprintf (notes_file, "%s\n", cmd + 1);
  }
  
 /* -------------------do_moves.c---------------------- */
 
 

/* function to interpret a command to move around in the current level
 * of the browser display ... handles "+", "-", and "<return>" ... calls
 * routine make_move() to do the real work....
 */

void do_move (cmd)
  char cmd[];
  {
    long move;
    extern FILE *doc_file;
    char *strcat();
    void beep(), show_current_item();
    
    if (doc_file == NULL)
      {
        beep ();
        printf ("No file open!\n");
        return;
      }
    
    if (cmd[1] == '\0')
        strcat (cmd, "1");
    move = atol (cmd);
    make_move (move);
    show_current_item ();
  }


/* function to do the actual moving around in the INDEX or CONTEXT or
 * TEXT displays .... Safety features prevent user from going
 * off the end of the file in either direction....
 * make_move() returns FALSE if it fails to completely execute the move
 * (i.e., if the move would have run off either end of the file) and
 * beeps at the user ... it returns TRUE if the move succeeds....
 */

int make_move (n)
  long n;
  {
    int r;
    PTR_REC get_ptr_rec ();
    extern long current_item[], min_item[], max_item[];
    extern int level;
    extern char *subset;
    void beep();
    
    r = TRUE;
    switch (level)
      {
        case INDEX:
            current_item[INDEX] += n;
            if (current_item[INDEX] < min_item[INDEX])
              {
                current_item[INDEX] = min_item[INDEX];
                r = FALSE;
              }
            if (current_item[INDEX] > max_item[INDEX])
              {
                current_item[INDEX] = max_item[INDEX];
                r = FALSE;
              }
            break;

        case CONTEXT:
            if (subset == NULL)
              {
                current_item[CONTEXT] += n;
                if (current_item[CONTEXT] < min_item[CONTEXT])
                  {
                    current_item[CONTEXT] = min_item[CONTEXT];
                    r = FALSE;
                  }
                if (current_item[CONTEXT] > max_item[CONTEXT])
                  {
                    current_item[CONTEXT] = max_item[CONTEXT];
                    r = FALSE;
                  }
              }
            else
                r = make_subindex_move (n);

            current_item[TEXT] = get_ptr_rec (current_item[CONTEXT]);
            break;

        case TEXT:
            r = move_in_text (n);
            break;
      }
    
    if (r == FALSE)
        beep ();
    return (r);
  }


/* move up or down the chosen number of lines of text, and put the result
 * into current_item[TEXT] ... return FALSE if attempted move would have
 * run off the end of the file, non-zero if the move was completed without
 * error....
 */
 
int move_in_text (move)
  register long move;
  {
    int result;
    register long loc;
    extern long current_item[];
    
    result = TRUE;
    loc = current_item[TEXT];
    
    if (move < 0)
        for ( ; move < 0; ++move)
          {
            if (loc <= 0)
              {
                result = FALSE;
                break;
              }
            loc = start_of_line (loc - 1);
          }
            
    else if (move > 0)
        for ( ; move > 0; --move)
          {
            loc = next_line (loc);
            if (loc >= max_item[TEXT])
              {
                result = FALSE;
                loc = start_of_line (max_item[TEXT]);
                break;
              }
          }
    
    current_item[TEXT] = loc;
    return (result);
  }


/* make a move in the working subindex ... must just step along in
 * whichever direction is desired until either hitting the end (in
 * which case the last valid item found in the subindex should be
 * returned as the current one) or finishing the requested move.
 * Return FALSE if hit a wall, TRUE otherwise....
 *
 * This routine is only called when level == CONTEXT ... since
 * in TEXT level we are just moving around in the full text of
 * the document file, and in the INDEX level we count and display
 * even items with zero occurrences in the subindex...
 *
 * This routine is only called when subset != NULL, since if there
 * is no working subset the move becomes trivial arithmetic.
 *
 * This routine is only called when either current_item[CONTEXT]
 * is a good item in the subset already, or when there is a certainty
 * that a good item will be found in the subsequent scan (specifically,
 * when scanning down to find the first good item when called from
 * do_descend () ....).
 */

int make_subindex_move (move)
  long move;
  {
    register long i, last_good_item;
    int result;
    PTR_REC get_ptr_rec ();
    extern long current_item[], min_item[], max_item[];
    extern char *subset;

    result = TRUE;
    last_good_item = current_item[CONTEXT];

    if (move >= 0)
      {
        for (i = 0; i < move; ++i)
          {
            while (++current_item[CONTEXT] <= max_item[CONTEXT] &&
                ! get_subset_bit ((long)
                    get_ptr_rec (current_item[CONTEXT])));
            if (current_item[CONTEXT] > max_item[CONTEXT])
                break;
            last_good_item = current_item[CONTEXT];
          }
        if (current_item[CONTEXT] > max_item[CONTEXT])
          {
            result = FALSE;
            current_item[CONTEXT] = last_good_item;
          }
      }
    else
      {
        for (i = 0; i > move; --i)
          {
            while (--current_item[CONTEXT] >= min_item[CONTEXT] &&
                ! get_subset_bit ((long)
                    get_ptr_rec (current_item[CONTEXT])));
            if (current_item[CONTEXT] < min_item[CONTEXT])
                break;
            last_good_item = current_item[CONTEXT];
          }
        if (current_item[CONTEXT] < min_item[CONTEXT])
          {
            result = FALSE;
            current_item[CONTEXT] = last_good_item;
          }
      }
    return (result);
  }
  
 /* -------------------do_subset.c------------------- */
 
/* words to handle subset (proximity filter) tasks....
 * ^z -- 870810-13-....
 *
 * Subset (or subindex) restrictions are useful in doing searches for
 * combinations of terms, phrases, etc., where the terms are themselves
 * common words.  Subsets also become indispensible when working in
 * very large databases, where even slightly-exotic terms occur too many
 * times for convenient browsing through their CONTEXT displays.
 *
 * When a subset has been defined, then instead of showing an INDEX
 * item as something like:
 *      3141 UNIX
 * that item is displayed with a count of how many occurrences are
 * 'valid' in addition to the total number of occurrences:
 *   27/3141 UNIX
 * Thus, in this case only 27 out of the 3141 appearances of the term
 * 'UNIX' happened to be in the neighborhood of the set of words chosen
 * by the user to define the current working subset.
 * 
 * The 'neighborhood' (a half dozen words or so on each side) of a chosen
 * index term is added (logical OR) into the working subset by giving
 * the '&' command when that term's INDEX display is the current item.
 * If a larger neighborhood (half a dozen sentences or so each way) is
 * preferable, use the '&&' command; for a still larger neighborhood
 * (a few paragraphs on each side), use the '&&&' command.
 *
 *
 * IMPLEMENTATION NOTES:
 *
 * Subest searching is handled by an array of flag bits -- one bit
 * for each chunk of NEIGHBORHOOD bytes in the original text.  Bits are
 * held in the array subset[]; they are zero for 'invalid' regions
 * of the original document, and one for 'valid' regions that have
 * been defined by proximity to index terms selected by the user.
 *
 * A value of 32 for NEIGHBORHOOD seems to work very well for defining
 * proximity.  The compression factor from the original document to the
 * array subset[] is NEIGHBORHOOD*8 = 256 in that case.  So, even for a
 * document that is tens of megabytes long, the subset[] array only
 * requires a few hundred kB and it is quite feasible to hold it in
 * memory.
 *
 * The presence of a subset is signalled when the global array pointer
 * 'subset' is non-NULL ... in which case show_current_index_item,
 * make_move, and other words modify their behavior in order to
 * reflect the chosen subset.  If the subset is completely
 * empty, after having just been created or flushed, then the
 * global variable empty_subset is nonzero (true) and short-cuts
 * are taken in counting and displaying words....
 *
 * Consider a single occurrence of a word.  Suppose we want to add the
 * immediate neighborhood of that word to our working subset.  To avoid
 * edge-effects due to the chunkiness of the definition of neighborhood,
 * the routine to set bits in subset[] actually sets 2*WORD_RANGE+1 bits:
 * the bit corresponding to the chunk wherein the chosen word falls,
 * and WORD_RANGE extra bits on each side.
 *
 * Thus, for the choice WORD_RANGE = 1, any index item which is
 * within NEIGHBORHOOD (=32) bytes of our chosen word is certain
 * to be included in the proximity subset; any item which occurs
 * at least 2*NEIGHBORHOOD (=64) bytes away is certain NOT to be
 * included, and items in the intermediate range have a
 * linearly-decreasing probability of false inclusion.  The choice
 * of 32 for NEIGHBORHOOD and 1 for WORD_RANGE therefore gives
 * essentially all items within half a dozen or so words
 * (average word length is 5-6 letters) of the term used to
 * define the subset....
 *
 * In extensive experimentation with the MacForth-based Browser v.244+
 * program on the Macintosh, the above definition of proximity seemed
 * to be by far the most useful one in real life.  It is also quite
 * straightforward to implement with good efficiency.  In addition
 * to the 'word'-neighborhood proximity (within WORD_RANGE chunks),
 * it is occasionally convenient to add a somewhat larger
 * neighborhood to the working subset -- corresponding to proximity
 * within a few sentences or even a few paragraphs.  To do that,
 * the && (sentence-proximity) and &&& (paragraph-proximity) commands
 * simply set more bits on either side of the word's location in
 * subset[].  Specifically, && sets SENTENCE_RANGE bits on each side,
 * and &&& sets PARAGRAPH_RANGE bits on each side.  Values of 10 and 100
 * respectively for those parameters seem to work quite well.
 */



/* Handle the * command to empty out the working subset before
 * beginning to do proximity-filtered searching (that is, to create
 * the array subset[] in empty form). 
 * Also handle the ** command to destroy subset[] (which makes it
 * seem as if it is "full" from the user's viewpoint)
 *
 * Force the user back to INDEX level when the working subindex
 * is emptied or filled, to avoid inconsistencies in moving around
 * the CONTEXT level....
 */

void do_make_subset (cmd)
  char cmd[];
  {
    void beep (), create_subset (), destroy_subset (),
            show_current_item ();
    extern int level;
    
    if (cmd[1] == '\0')
        create_subset ();
    else if (cmd[1] == '*')
        destroy_subset ();
    else
        beep ();
    
    level = INDEX;
    show_current_item ();
  }


/* Do the job of creating the empty array subset[] ... note that if
 * running on a machine with 16-bit int variables such as Lightspeed C
 * on the Mac, the calloc() function won't work for files bigger
 * than 16 MB or so (for NEIGHBORHOOD = 32) ....must modify this
 * to use clalloc(), the non-ANSI standard function for allocating
 * and clearing bigger memory chunks.  Hence, the #ifdef LIGHTSPEED
 * lines below....
 *
 * Note that there is no need to provide a "No file open!" error msg
 * since show_current_item() in calling function will do that for
 * us....
 */

void create_subset ()
  {
    extern char* subset;
    extern FILE *doc_file;
    extern int empty_subset;
    extern long max_item[];
#ifdef LIGHTSPEED
    char *clalloc ();
#else
    char *calloc ();
#endif
    void beep (), destroy_subset ();
    
    if (doc_file == NULL)
      return;

    destroy_subset ();
#ifdef LIGHTSPEED
    if ((subset = clalloc ((unsigned long)(1 +
            max_item[TEXT]/(NEIGHBORHOOD*8)), (long)sizeof(char))) == NULL)
#else    
    if ((subset = calloc ((unsigned int)(1 +
            max_item[TEXT]/(NEIGHBORHOOD*8)), sizeof(char))) == NULL)
#endif
      {
        beep ();
        printf ("Not enough memory for subset!\n");
        return;
      }
    
    empty_subset = TRUE;
  }


/* routine to destroy a subset (used in response to a ** command,
 * or when changing over to a new file with a : command, or when about
 * to create a new empty subset inside the * command)
 */

void destroy_subset ()
  {
    extern char *subset;
    
    if (subset != NULL)
        free (subset);
    subset = NULL;
  }


/* routine to invert the working subindex (response to a ~ command) --
 * perform a logical NOT on the entire set, so that what was once a
 * member of the set becomes a non-member, and vice versa....
 *
 * Must set empty_subset FALSE since we don't a priori know that the
 * resulting set is empty or full or what....
 *
 * As with * and ** commands, kick the user back to the INDEX level
 * when this command is executed, for safety's sake....
 */

void do_invert_subset ()
  {
    register long i, lim;
    extern char *subset;
    extern long max_item[];
    extern int empty_subset;
    void beep();

    if (doc_file == NULL)
      {
        beep ();
        printf ("No file open!\n");
        return;
      }
    if (subset == NULL)
      {
        beep ();
        printf ("No subset!\n");
        return;
      }

    lim = max_item[TEXT]/(NEIGHBORHOOD*8);
    for (i = 0; i <= lim; ++i)
        subset[i] = ~subset[i];

    empty_subset = FALSE;
    level = INDEX;
    show_current_item ();
  }
  

/* handle the '&' command to add the current word's neighborhood to
 * the working subset:
 *    &    adds a few-words neighborhood
 *    &&    adds a few-sentences neighborhood
 *    &&&    adds a few-paragraphs neighborhood
 *
 * Note that instead of calling show_current_item() to finish up
 * this function, since we know that every occurrence of the
 * current item will be in the working subset we can save time
 * and avoid re-counting them all ... hence, the final lines
 * of this routine
 */

void do_add_neighborhood (cmd)
  char cmd[];
  {
    int nsize;
    extern int level;
    extern char *subset;
    extern FILE *doc_file, *notes_file;
    void beep (), set_neighborhood_bits (), get_key_rec ();
    extern KEY_REC this_rec, prev_rec;
    extern long current_item[], subset_rec_count;

    if (doc_file == NULL)
      {
        beep ();
        printf ("No file open!\n");
        return;
      }
    if (subset == NULL)
      {
        beep ();
        printf ("No subset!\n");
        return;
      }

    nsize = WORD_RANGE;
    if (cmd[1] == '&')
      {
        nsize = SENTENCE_RANGE;
        if (cmd[2] == '&')
            nsize = PARAGRAPH_RANGE;
      }
    
    level = INDEX;
    set_neighborhood_bits (nsize);
    empty_subset = FALSE;
    get_key_rec (&prev_rec, current_item[INDEX] - 1);
    get_key_rec (&this_rec, current_item[INDEX]);
    subset_rec_count = this_rec.ccount - prev_rec.ccount;
    printf ("%6ld/%-6ld %.28s\n", subset_rec_count, subset_rec_count,
                this_rec.kkey);
    if (notes_file != NULL)
        fprintf (notes_file, "%6ld/%-6ld %.28s\n", subset_rec_count,
                    subset_rec_count, this_rec.kkey);
  }


/* function to set n bits on each side of each current index term in the
 * subset[] array ... note that it is important to set min_item[CONTEXT]
 * and max_item[CONTEXT] values before using them, since they are only
 * set ordinarily when descending ('=' command) into the CONTEXT level...
 * values of prev_rec and this_rec are set every time an index item
 * is displayed, so they will be all right for us already....
 */

void set_neighborhood_bits (n)
  register int n;
  {
    register long i;
    register PTR_REC j, j0, j1;
    extern long min_item[], max_item[];
    extern KEY_REC prev_rec, this_rec;
    PTR_REC get_ptr_rec ();
    void set_subset_bit ();
    
    min_item[CONTEXT] = prev_rec.ccount;
    max_item[CONTEXT] = this_rec.ccount - 1;
    
    if ((this_rec.ccount-prev_rec.ccount) * n > GIVE_WARNING)
        printf ("Please wait (%ld bits to set)...\n",
            (this_rec.ccount - prev_rec.ccount) * n * 2 + 1);

    for (i = min_item[CONTEXT]; i <= max_item[CONTEXT]; ++i)
      {
        j = get_ptr_rec (i);
        j0 = j - n * NEIGHBORHOOD;
        if (j0 < min_item[TEXT])
            j0 = min_item[TEXT];
        j1 = j + n * NEIGHBORHOOD;
        if (j1 > max_item[TEXT])
            j1 = max_item[TEXT];
        for (j = j0; j <= j1; j += NEIGHBORHOOD)
            set_subset_bit (j);
      }
  }


/* function to set a bit in the array subset[] for a chosen character
 * offset from the start of the file ... just convert the offset into
 * byte and bit numbers and then "OR" the 1 into that slot....
 *
 * (An attempt to optimize for the specific value NEIGHBORHOOD = 32,
 * using & and >> in place of % and /, did not yield a significant
 * improvement in speed... ^z 870813)
 */

void set_subset_bit (offset)
  long offset;
  {
    int bit_no;
    long byte_no;
    extern char *subset;

    bit_no = (offset % (8 * NEIGHBORHOOD)) / NEIGHBORHOOD;
    byte_no = offset / (8 * NEIGHBORHOOD);
    
    subset[byte_no] |= 1 << bit_no;
  }


/* function to return the value of a bit in the array subset[] for a
 * chosen character offset from the start of the document file ...
 * as in set_subset_bit() above, just convert offset into byte and
 * bit numbers, extract the relevant bit, shift it down, and return
 * it....
 *
 * (An attempt to optimize for the specific value NEIGHBORHOOD = 32,
 * using & and >> in place of % and /, did not yield a significant
 * improvement in speed... ^z 870813)
 */

int get_subset_bit (offset)
  long offset;
  {
    int bit_no;
    long byte_no;
    extern char *subset;

    bit_no = (offset % (8 * NEIGHBORHOOD)) / NEIGHBORHOOD;
    byte_no = offset / (8 * NEIGHBORHOOD);

    return ((subset[byte_no] >> bit_no) & 1);
  }


/* function to count and return the number of occurrences of this_rec
 * in the working subindex (i.e., the number of times the word comes
 * up with its subset[] bit turned ON) ....
 */
 
long count_subset_recs (this_recp, prev_recp)
  KEY_REC *this_recp, *prev_recp;
  {
    register long i, n;
    extern int empty_subset;
    PTR_REC get_ptr_rec ();
    int get_subset_bit ();
    
    if (empty_subset)
        return (0L);

    if (this_recp->ccount - prev_recp->ccount > GIVE_WARNING)
        printf ("Please wait (%ld words to check)...\n",
                    this_recp->ccount - prev_recp->ccount);
    
    for (n = 0, i = prev_recp->ccount; i < this_recp->ccount; ++i)
        n += get_subset_bit ((long)get_ptr_rec (i));
    
    return (n);
  }


/* ----------------------do_targets.c----------------- */

/* some functions to respond to various user inputs...
 *  870806-13-... ^z
 */


/* function to move down a level in the browser hierarchy:
 *    INDEX --> CONTEXT --> TEXT
 * includes various safety features against errors, and takes
 * care of initializations for the level being entered ... also
 * displays the current line when entering the new level, for the user's
 * convenience....
 *
 * Modified for subset operations, ^z - 870813.  Note that we must check
 * here to be sure that we are descending into a non-empty subset when
 * a subset is active and we are descending from INDEX --> CONTEXT;
 * we also must make sure in that case that we initialize the CONTEXT
 * display to start with the first good item, not just min_item[CONTEXT].
 */

void do_descend ()
  {
    extern int level, empty_subset;
    extern long current_item[], min_item[], max_item[], subset_rec_count;
    extern KEY_REC this_rec, prev_rec;
    extern FILE *doc_file;
    extern char *subset;
    void beep();
    
    if (doc_file == NULL)
      {
        beep ();
        printf ("No file open!\n");
        return;
      }

    if (current_item[INDEX] < 0)
      {
        beep ();
        printf ("No current index item!\n");
        return;
      }
    
    if (subset != NULL && (empty_subset || subset_rec_count == 0))
      {
        beep ();
        printf ("No items in subset!\n");
        return;
      }

    ++level;

    if (level == CONTEXT)
      {
        min_item[CONTEXT] = prev_rec.ccount;
        max_item[CONTEXT] = this_rec.ccount - 1;
        if (subset == NULL)
            current_item[CONTEXT] = min_item[CONTEXT];
        else
          {
            current_item[CONTEXT] = min_item[CONTEXT] - 1;
            make_subindex_move (1L);
          }
        current_item[TEXT] = get_ptr_rec (current_item[CONTEXT]);
      }

    if (level == TEXT)
        current_item[TEXT] =
                start_of_line (current_item[TEXT]);

    if (level > TEXT)
      {
        beep ();
        printf ("Can't descend past full text display!\n");
        level = TEXT;
      }
    if (smodct == 0){
    show_current_item (); }
  }

/* function to move up a level in the browser hierarchy:
 *       TEXT --> CONTEXT --> INDEX
 * includes a safety net against going past INDEX, and
 * displays the current line when entering the new level...
 * note that when coming up from TEXT, must reset the current_item[TEXT]
 * before displaying CONTEXT line, as TEXT browsing changes it....
 */


void do_ascend ()
  {
    extern int level;
    void beep();
    
    --level;
    
    if (level < INDEX)
      {
        beep ();
        printf ("Can't ascend past index display!\n");
        level = INDEX;
      }

    if (level == CONTEXT)
        current_item[TEXT] = get_ptr_rec (current_item[CONTEXT]);

    if (smodct == 0){
    show_current_item (); }
  }


/* function to jump the INDEX display to a target entered by the
 * user ... does a simple binary search (see K&R p.54) to get there
 * and then shows that line of the INDEX ... and if the
 * target word is not found, it beeps and shows the preceeding
 * word available in the index ... if called from another level, it
 * jumps to the INDEX level ...
 */

void do_target_jump (cmd)
  char cmd[];
  {
    register int c, diff;
    register long low, high, mid;
    KEY_REC target_item, this_item;
    extern long current_item[], max_item[];
    extern FILE *key_file;
    extern int level;
    void beep(), init_target_item();
    
    if (key_file == NULL)
      {
        beep ();
        printf ("No file open!\n");
        return;
      }
    
    level = INDEX;
    init_target_item (&target_item, cmd);
    low = min_item[INDEX];
    high = max_item[INDEX];

    while (low <= high)
      {
        mid = (low + high) / 2;
        get_key_rec (&this_item, mid);
        diff = zstrcmp (target_item.kkey, this_item.kkey);
        if (diff < 0)
            high = mid - 1;
        else if (diff > 0)
            low = mid + 1;
        else
          break;
      }

    current_item[INDEX] = mid;
    if (diff < 0)
        --current_item[INDEX];
    if (current_item[INDEX] < 0)
        current_item[INDEX] = 0;
    if (diff != 0)
        beep ();
    show_current_item ();
  }



/* my function to compare two strings and give a result as to who is
 * alphabetically earlier.  Note that this is almost the same as strncmp()
 * with the fixed value of KEY_LENGTH as the maximum comparison distance,
 * except that I must be sure to mask the characters to make them positive
 * (since we want to be able to handle the non-ASCII funny letters in
 * the Apple character set properly/consistently).  If the masking isn't
 * done, then inconsistent results can occur with those non-ASCII chars!
 */

int zstrcmp (s1, s2)
  register char *s1, *s2;
  {
    register int n = KEY_LENGTH;
    
    for (; --n && ((*s1 & 0xFF) == (*s2 & 0xFF)); s1++, s2++)
        if (!*s1) break;
        
    return ((*s1 & 0xFF) - (*s2 & 0xFF));
  }



/* initialize the target KEY_REC kkey string to the value typed in by
 * the user ... convert the user's string to all capital letters, and
 * pad it out to KEY_LENGTH with trailing blanks as needed ... use the
 * toupper() function warily (assume that it may be nonstandard and
 * mess up the value of non-lowercase characters, as it seems to on
 * the VAX and Sun C compilers I've tried -- so check and don't apply
 * toupper() except to lower-case characters!)....
 */

void init_target_item (rp, cmd)
  KEY_REC *rp;
  char cmd[];
  {
    register int c, n;

    strncpy (rp->kkey, "                                    ", KEY_LENGTH);
    for (n = 0; n < KEY_LENGTH && (c = cmd[n]) != 0; ++n)
        rp->kkey[n] = (islower (c) ? toupper (c) : c);
  }


/* handle the printing out of N lines due to a ".N" user command ... do
 * the job simply by marching down a step and displaying that line N times
 * ... precisely equivalent to hitting the <return> key N times.
 */

void do_multiprint (cmd)
  char cmd[];
  {
    register long i, n;
    extern long smode;
    extern FILE *doc_file;
    long smodsv;
    void beep();
    
    if (doc_file == NULL)
      {
        beep ();
        printf ("No file open!\n");
        return;
      }
    smodsv = smode;
    smode = 0;
    if (cmd[1] == '\0')
        strcat (cmd, "1");
    n = atol (cmd + 1);
    for (i = 0; i < n; ++i)
      {
        if (! make_move (1L))
            break;
        show_current_item ();
      }
     smode=smodsv;
  }

/* ---------------------file_utils.c--------------------- */

/* initialize, open, etc. various things for brwsr program...
 * 870805-13... ^z
 */


/* open the document, key, and pointer files ...
 * for now, demand that if the document file is named * then the
 * key file must be named *_k and the pointer file must be *_p
 * ... just the way that the ndxr program builds the index.....
 */

void open_files (cmd)
  char cmd[];
  {
    char ocmd[STRLEN], *strcat(), *strcpy();
    FILE *fopen();
    extern FILE *doc_file, *key_file, *ptr_file;
    void beep();

    close_files ();
    strcpy (ocmd, cmd + 1);
    if ((doc_file = fopen (ocmd, "r")) == NULL)
      {
        beep ();
        printf ("Error opening document file \"%s\"!\n", ocmd);
        close_files ();
        return;
      }

    strcat (ocmd, "_k");
    if ((key_file = fopen (ocmd, "rb")) == NULL)
      {
        beep ();
        printf ("Error opening key file \"%s\"!\n", ocmd);
        close_files ();
        return;
      }

    ocmd[strlen (ocmd) - 2] = '\0';
    strcat (ocmd, "_p");
    if ((ptr_file = fopen (ocmd, "rb")) == NULL)
      {
        beep ();
        printf ("Error opening ptr file \"%s\"!\n", ocmd);
        close_files ();
        return;
      }
  }


/* close off the document, key, and pointer files
 */
 
void close_files ()
  {
    extern FILE *doc_file, *key_file, *ptr_file;
    
    if (doc_file != NULL)
      {
        fclose (doc_file);
        doc_file = NULL;
      }
    if (key_file != NULL)
      {
        fclose (key_file);
        key_file = NULL;
      }
    if (ptr_file != NULL)
      {
        fclose (ptr_file);
        ptr_file = NULL;
      }
  }


/* set up initial values for current_item and max_item arrays ...
 * initially, current_item is set to an illegal value, -1, and
 * max_item[CONTEXT] and max_item[TEXT] convey information about
 * the sizes of the pointer and document files respectively...
 */

void init_items ()
  {
    extern long current_item[], max_item[];
    extern FILE *doc_file, *key_file, *ptr_file;
    extern int level;
    
    level = INDEX;
    
    current_item[INDEX] = -1;
    current_item[CONTEXT] = -1;
    current_item[TEXT] = -1;

    fseek (key_file, 0L, 2);
    max_item[INDEX] = ftell (key_file) / sizeof (KEY_REC) - 1;
    
    fseek (ptr_file, 0L, 2);
    max_item[CONTEXT] = ftell (ptr_file) / sizeof (PTR_REC) - 1;

    fseek (doc_file, 0L, 2);
    max_item[TEXT] = ftell (doc_file) - 1;
  }


/* --------------------show_items.c------------------ */

/* functions to show a chosen item from an index key file,etc.
 * 870805-13...  ^z
 */


/* function to show whatever the current item is, in whatever level
 * the user is at the moment.... basically, it just routes the
 * request to whichever is the appropriate agent to take care of
 * it, for INDEX, CONTEXT, or TEXT levels....
 */
 
void show_current_item ()
  {
    extern int level;
    extern FILE *doc_file;
    extern long smodct;
    extern long smode;
    long mvidx;
    long moved;
    void beep(), show_current_index_item(), show_current_context_item(),
        show_current_text_item();
    int kk;
    char escseq[80];
    char escclr[20];
    
    moved = 0;
    mvidx = 0;

    if (doc_file == NULL)
      {
        beep ();
        printf ("No file open!\n");
        return;
      }
    
    if (level == INDEX){
	if (smode != 0 && smodct == 0){
	smodct = 1L;
	strcpy (escseq,"\033[H\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K");
	printf ("%.45s",escseq);
	strcpy (escseq,"\033[H");
	printf ("%.3s",escseq);
        mvidx = -1L;
	moved = 0L;
	for (kk=0; kk < 3 ; kk++){
        if (make_move(mvidx)) moved = moved - 1L;
        }
/* Just step through and display lines, and keep track of how far we
 * moved. Move back to original when done. */
         for (kk = 0; kk < 7; kk++){
          show_current_index_item ();
	  mvidx = 1L;
          if (make_move(mvidx))moved++;
	  } /* end for */
	 mvidx =  - moved;
         if (make_move(mvidx)) moved = 0;
/* Position to line 22 (and erase it) now to ensure the rest of the
   display does not mess up the screen mode stuff just drawn. */
/* Display ONE context item */
	strcpy (escseq,"\033[22;1H\033[J");
	printf ("%.10s",escseq);
        show_current_index_item ();
        strcpy (escseq,"\033[8;1H\033[J\033[11;1H\033[J");
	printf ("%.19s",escseq);
	do_descend();
/*        show_current_context_item (); */
	strcpy (escseq,"\033[8;1H\033[1m");
	printf ("%.10s",escseq);
	moved = 0;
        mvidx = -1L;
	for (kk=0; kk < 3 ; kk++){
        if (make_move(mvidx)) moved = moved - 1;
        }
/* Just step through and display lines, and keep track of how far we
 * moved. Move back to original when done. */
         for (kk = 0; kk < 7; kk++){
          show_current_context_item ();
	  mvidx = 1L;
          if (make_move(mvidx))moved++;
	  } /* end for */
	 mvidx = -moved;
         if (make_move(mvidx)) moved = 0;
	strcpy (escseq,"\033[22;1H\033[K\033[0m");
	printf ("%.14s",escseq);
	do_ascend();
        smodct = 0;
	strcpy (escseq,"\033[22;1H\033[J");
	printf ("%.10s",escseq);
	strcpy (escseq,"\033[7;1m");
	strcpy (escclr,"\033[0m");
	} /* end if smode */
	if(smode != 0 && smodct == 0) printf ("%.6s",escseq);
        show_current_index_item ();
	if(smode != 0 && smodct == 0) printf ("%.4s",escclr);
	}
    else if (level == CONTEXT){
	if (smode != 0 && smodct == 0){
	smodct = 1;
	strcpy (escseq,"\033[8;1H\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K");
	printf ("%.48s",escseq);
	strcpy (escseq,"\033[8;1H\033[1m");
	printf ("%.10s",escseq);
	moved = 0;
        mvidx = -1L;
	for (kk=0; kk < 3 ; kk++){
        if (make_move(mvidx)) moved = moved - 1;
        }
/* Just step through and display lines, and keep track of how far we
 * moved. Move back to original when done. */
         for (kk = 0; kk < 7; kk++){
          show_current_context_item ();
	  mvidx = 1L;
          if (make_move(mvidx))moved++;
	  } /* end for */
	 mvidx = -moved;
         if (make_move(mvidx)) moved = 0;
/* Position to line 22 (and erase it) now to ensure the rest of the
   display does not mess up the screen mode stuff just drawn. */
	strcpy (escseq,"\033[15;1H\033[J\033[18;1H\033[J\033[0m");
	printf ("%.24s",escseq);
	do_descend();
/*        show_current_text_item (); */
	strcpy (escseq,"\033[15;1H");
	printf ("%.7s",escseq);
	moved = 0;
        mvidx = -1L;
	for (kk=0; kk < 3 ; kk++){
        if (make_move(mvidx)) moved = moved - 1;
        }
/* Just step through and display lines, and keep track of how far we
 * moved. Move back to original when done. */
         for (kk = 0; kk < 7; kk++){
          show_current_text_item ();
	  mvidx = 1L;
          if (make_move(mvidx))moved++;
	  } /* end for */
	 mvidx = -moved;
         if (make_move(mvidx)) moved = 0;
	strcpy (escseq,"\033[22;1H\033[J");
	printf ("%.10s",escseq);
	do_ascend();
        smodct = 0;
	strcpy (escseq,"\033[22;1H\033[J");
	printf ("%.10s",escseq);
	strcpy (escseq,"\033[7;1m");
	strcpy (escclr,"\033[0m");
	} /* end if smode */
	if(smode != 0 && smodct == 0) printf ("%.6s",escseq);
        show_current_context_item ();
	if(smode != 0 && smodct == 0) printf ("%.4s",escclr);
	}
    else {
	if (smode != 0 && smodct == 0){
	smodct = 1L;
	strcpy (escseq,"\033[15;1H\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K\033[1B\033[K");
	printf ("%.49s",escseq);
	strcpy (escseq,"\033[15;1H");
	printf ("%.7s",escseq);
	moved = 0;
        mvidx = -1L;
	for (kk=0; kk < 3 ; kk++){
        if (make_move(mvidx)) moved = moved - 1;
        }
/* Just step through and display lines, and keep track of how far we
 * moved. Move back to original when done. */
         for (kk = 0; kk < 7; kk++){
          show_current_text_item ();
	  mvidx = 1L;
          if (make_move(mvidx))moved++;
	  } /* end for */
	 mvidx = -moved;
         if (make_move(mvidx)) moved = 0;
/* Position to line 22 (and erase it) now to ensure the rest of the
   display does not mess up the screen mode stuff just drawn. */
        smodct = 0;
	strcpy (escseq,"\033[22;1H\033[J");
	printf ("%.10s",escseq);
	strcpy (escseq,"\033[7;1m");
	strcpy (escclr,"\033[0m");
	} /* end if smode */
	if(smode != 0 && smodct == 0) printf ("%.6s",escseq);
        show_current_text_item ();
	if(smode != 0 && smodct == 0) printf ("%.4s",escclr);
  }
}

/* function to show the current INDEX item (count of occurrences followed
 * by the indexed word itself) ... send copy to notes file, if open....
 */

void show_current_index_item ()
  {
    extern KEY_REC this_rec, prev_rec;
    extern long current_item[], subset_rec_count;
    extern FILE *notes_file;
    extern long smodct;
    extern char *subset;
    long count_subset_recs ();
	int kk;
    void get_key_rec ();

    get_key_rec (&prev_rec, current_item[INDEX] - 1);
    get_key_rec (&this_rec, current_item[INDEX]);
    
    if (subset == NULL)
      {
        printf ("%6ld %.28s\n", this_rec.ccount - prev_rec.ccount,
                    this_rec.kkey);
        if (notes_file != NULL && smodct == 0)
            fprintf (notes_file, "%6ld %.28s\n",
                    this_rec.ccount - prev_rec.ccount, this_rec.kkey);
      }
    else
      {
          subset_rec_count = count_subset_recs (&this_rec, &prev_rec);
        printf ("%6ld/%-6ld %.28s\n", subset_rec_count,
                    this_rec.ccount - prev_rec.ccount, this_rec.kkey);
        if (notes_file != NULL && smodct == 0)
        fprintf (notes_file, "%6ld/%-6ld %.28s\n", subset_rec_count,
                    this_rec.ccount - prev_rec.ccount, this_rec.kkey);
      }
  }


/* function to show the current CONTEXT item, a line in the form of a
 * key-word-in-context (KWIC) display with the indexed term in the'
 * middle ... the line is filtered so that the presence of tabs, <cr>'s,
 * or other nasty control characters won't cause any problems... 
 * a little testing is needed to take care of end-effects, so that 
 * nothing happens for context lines near either end of the document
 * file ... finally, send a copy to the notes file, if open....
 */

void show_current_context_item ()
  {
    register int n, m;
    register long p;
    char buf[CONTEXT_LINE_LENGTH + 1];
    extern long smodct;
    extern long smode;
    extern long current_item[];
    extern FILE *doc_file;
    void beep();
    
    p = current_item[TEXT] - CONTEXT_OFFSET;
    n = 0;
    if (p < 0)
      {
        for ( ; n < -p; ++n)
            buf[n] = ' ';
        p = 0;
      }
    if (fseek (doc_file, p, 0) != 0)
          {
            beep ();
            printf ("Error in fseek() getting a context line to show!\n");
            return;
          }
    if ((m = fread (buf + n, sizeof (char), CONTEXT_LINE_LENGTH - n,
                        doc_file)) == 0)
          {
            beep ();
            printf ("Error in fread() getting a context line to show!\n");
            return;
          }
    n += m;
    for ( ; n < CONTEXT_LINE_LENGTH; ++n)
        buf[n] = ' ';
    for (n = 0; n < CONTEXT_LINE_LENGTH; ++n)
        if (! isprint (buf[n] & 0xFF))
            buf[n] = ' ';
    buf[CONTEXT_LINE_LENGTH] = '\0';
    printf ("%s\n", buf);
    if (notes_file != NULL && smodct == 0)
        fprintf (notes_file, "%s\n", buf);
  }


/* function to show the current TEXT item, a line from the document file
 * itself ... copy to notes file also, if so desired....
 */

void show_current_text_item ()
  {
    char buf[STRLEN + 1];
    extern long current_item[];
    extern long smode;
    extern long smodct;
    extern FILE *doc_file;
    void beep();
    
    if (fseek (doc_file, current_item[TEXT], 0) != 0)
          {
            beep ();
            printf ("Error in fseek() getting a text line to show!\n");
            return;
          }
    if (fgets (buf, STRLEN, doc_file) == NULL)
          {
            beep ();
            printf ("Error in fgets() getting a text line to show!\n");
            return;
          }
    printf ("%s", buf);
    if (notes_file != NULL && smodct == 0)
            fprintf (notes_file, "%s", buf);
  }