>
>;Note: DEFAULT CLI MUST BE MCR
>
> ASN DL0:[1,1]=LB:
> 
> SET DEF DL1:[137,10]
> 
> @SET11S
;
;	Specify the disk name and unit number on which the VMS 11S
;	netgen kit is loaded.  For example:  DM, DB0:, etc.  Note
;	that the trailing colon is optional.  Assignments for RSXUSR
;	and ICM will be made based on your answer to this question.
;
>*WHAT DEVICE CONTAINS THE VMS 11S KIT? [S]: DL1
> ASN DL1:[137,10]NETUSR.EXE RSXUSR
> ASN DL1:[137,10]ICM.EXE ICM
> SET PROC/PRIV=(BYPASS,CMKRNL,SYSNAM)
> 
> ICM @VMS11S
>;
>; =====================================================================
>;  NET - RSX-11S CEX System Generation Procedure
>;        Started at 11:10:01 on 08-DEC-82
>; =====================================================================
>;
>; Copyright (C) 1981, 1982 by
>; Digital Equipment Corporation, Maynard, Mass.
>;
>; Generate a CEX System, Version 03.01, Base Level 15, for
>; your RSX-11S target system.
>;
>; The following CEX Products may be generated
>;	DECnet
>;
>; The distribution kits must be up  to  the  current  patch  level.   If
>; necessary, you should stop the  generation  and  apply  the  necessary
>; patches.
>;
>; The logical device name LB: should already be assigned to  the  device
>; which contains the library files for the system  you  are  generating.
>; These files are EXELIB.OLB, EXEMC.MLB,  RSXMAC.SML,  SYSLIB.OLB,  and,
>; for RSX-11S, 11SLIB.OLB.
>;
>; The logical device names IN:, OU:, LS: and MP: should not be  assigned
>; to any devices before starting the generation.  These  logical  device
>; names are used by NETGEN to refer to various  disks  used  during  the
>; generation.
>;
>;
>; <EOS>  Do you want to:
>*        <RET>-Continue, E-Exit [S]: 
>;
>;
>; =====================================================================
>;  NET - Section  1 - General Initialization
>; =====================================================================
>;
>* 01.00 Do you want to see the NETGEN notes/cautions [D=N]? [Y/N]: 
>* 02.00 Target system device [dduu, D=SY00:] [S]: DL0
>* 02.01 Do you have read/write access to DL00: [D=N]? [Y/N]: Y
>* 03.00 Listing device [dduu, D=None] [S]: 
>* 04.00 Map device [dduu, D=None] [S]: 
>* 05.00 UIC Group Code for NETGEN output [O R:1-377 D:5]: 6
>;
>; Checking for required library files, tasks, and UICs.
>;
! 'F$VERIFY(0)'
SET /UIC=[1,1]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]*.COM;*/DE/NM
$STOP/ID=0
>;
>; Saved responses were  detected.   These were compiled on 08-DEC-82  at
>; 10:40:44 with a User ID of "".
>;
>; An earlier set  of  saved  responses  was  compiled  on  23-SEP-82  at
>; 10:49:08 with a User ID of "".
>;
>* 07.01 Do you wish to use the later set of saved responses [D=N]? [Y/N]: 
>* 07.02 Do you wish to use the earlier set of saved responses [D=N]? [Y/N]: Y
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]*.GEN;*/DE/NM
$STOP/ID=0
>* 07.03 Do you want to display these saved responses [D=N]? [Y/N]: Y
>* 07.04 Do you want to change these saved responses [D=N]? [Y/N]: N
>* 07.05 Have you performed a SYSGEN since your last NETGEN [D=N]? [Y/N]: Y
>* 08.00 User ID for saving new responses [D=None] [S R:0.-30.]: 
>* 09.00 Is this generation to be a dry run [D=N]? [Y/N]: 
>* 11.00 Should old files be deleted [D=N]? [Y/N]: 
>;
>; <EOS>  Do you want to:
>*        <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]: 
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section  2 - Define the target system
>; =====================================================================
>;
>; Warning - The following system files may have have been invalidated by
>;           the most recent SYSGEN.  If necessary,  please  provide  new
>;           copies.
>;
>;           DL00:[006,064]RSX11S.STB and DL00:[006,010]RSXMC.MAC
>;
>;
>; =====================================================================
>;  NET - Section  2 - Define the target system
>; =====================================================================
>;
>* 01.00 Use the RSXMC.MAC on DL00:[006,010] [D=N]? [Y/N]: Y
>;
>; DL00:[006,010]RSXMC.MAC is being scanned to define your target system.
>; This may take up to several minutes.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,010]
$STOP/ID=0
! 'F$VERIFY(0)'
MAC ,DL00:[006,010]XXXXXX/-SP=DL00:[006,010]RSXMC/PA:1,XXXXXX
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,010]XXXXXX.MAC;*/DE/NM,XXXXXX.LST;*
$STOP/ID=0
>; The target is an RSX-11S system, running on
>; an 11/23 processor, with...
>;	Extended instruction set (EIS)
>;	Powerfail recovery support
>;	No remote task load support
>;	No task checkpointing
>;	PLAS support
>;
>; Checking for required library files and tasks.
>;
! 'F$VERIFY(0)'
SET /UIC=[1,1]
$STOP/ID=0
>* 03.00 Use the RSX11S.STB on DL00:[006,064] [D=N]? [Y/N]: Y
>;
>; The DECnet CEX Product will be generated.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLD.CMD/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDNET.CMD/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDDEC.CMD/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETINS.*/PU/NM
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section  3 - Define the system lines
>; =====================================================================
>;
>; The lines included in the CEX System are...
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
>; 
>; DMV-0	Owner=DECnet, State=On, Full Duplex, Synchronous
>; 		CSR=160320, Vector=330, Priority=5
>; 		Speed=56000
>; 		Multipoint slave, at tributary address 1
>; 
! 'F$VERIFY(0)'
PIP DL00:[006,001]*.COM/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETDDM.GEN=DL00:[006,001]NETDDX.COM/RE/NV/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section  4 - Define the CEX System
>; =====================================================================
>;
>; Creating build files for CEX, the communications executive.
>;
>; The CEX partition is "CEXPAR:73700:4100".
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDNET.DAT;*/DE/NM,NETBLD.DAT;*,NETCOM.COM;*
$STOP/ID=0
>; Network events will not be logged.
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]CEXBLD.CMD/PU/NM
$STOP/ID=0
>;
>; Creating build files for CETAB, the CEX configuration tables.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]CETABASM.CMD/PU/NM,CETABBLD.CMD
$STOP/ID=0
>; Creating build files for the DDMs, the device driver modules.
>;	DMV
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]DECDDH.COM;*/DE/NM,NETBLDDEC.DAT;*
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]DMVBLD.CMD/PU/NM
$STOP/ID=0
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETLLC.COM=DL0:[006,001]NETLLC.COM;1/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETLLC.COM/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDNET.CMD=DL00:[006,001]NETBLDNET.DAT/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDDEC.CMD=DL00:[006,001]NETBLDDEC.DAT/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETSYM.TMP;*/DE/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[137,10]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETGEN.GEN=DL00:[006,001]NETCOM.COM/AP/NM
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section  5 - Define the Comm Exec Support Components
>; =====================================================================
>;
>; Creating build files for NTINIT, the network initializer.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDNET.DAT;*/DE/NM,NETBLD.DAT;*,NETCOM.COM;*
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]NTINITBLD.CMD/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDNET.CMD=DL00:[006,001]NETBLDNET.DAT/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETGEN.GEN=DL00:[006,001]NETCOM.COM/AP/NM
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section  6 - Define the System Management Utilities
>; =====================================================================
>;
>; Creating build files for NCP, the network control program.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDNET.DAT;*/DE/NM,NETBLD.DAT;*,NETCOM.COM;*
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]NCPBLD.CMD/PU/NM
$STOP/ID=0
>; Creating build files for CFE, the configuration file editor.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]CFEBLD.CMD/PU/NM,CFEBLD.ODL
$STOP/ID=0
>; Creating build files for NDA, the network dump analyzer.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]NDABLD.CMD/PU/NM,NDABLD.ODL
$STOP/ID=0
>; Creating build files for VNP, the virtual network control program.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]VNPBLD.CMD/PU/NM,VNPBLD.ODL
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLD.CMD=DL00:[006,001]NETBLD.DAT/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDNET.CMD=DL00:[006,001]NETBLDNET.DAT/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETSYM.TMP;*/DE/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[137,10]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETGEN.GEN=DL00:[006,001]NETCOM.COM/AP/NM
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section  7 - Define the CEX Products
>; =====================================================================
>;
>; Questions concerning the following CEX Products will now be asked.
>;
>;	DECnet
>;
>;
>; =====================================================================
>;  DEC - DECnet CEX Product Generation Procedure
>;        Starting questions at 11:23:57 on 08-DEC-82
>; =====================================================================
>;
>; Copyright (C) 1981, 1982 by
>; Digital Equipment Corporation, Maynard, Mass.
>;
>; Generate the DECnet CEX Product for your RSX-11S target
>; System.
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
>;
>; =====================================================================
>;  DEC - Section  1 - Define the target and remote nodes
>; =====================================================================
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
>; Generating node 1 (RMINC), Id = REMOTE/MINC TEMPLATE SYSTEM
>; Node type is routing
>; Highest node number in network is 16
>; Maximum number of logical links is 10
>; Maximum number of hops is 10
>; Phase II compatibility will not be supported
>; The MACRO user library will be supplied
>; The FORTRAN/COBOL/BASIC+2 library will be supplied
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
>;
>; The DECnet MACRO user library will  be  placed  on  your  target  disk
>; as "DL00:[1,1]NETLIB.MLB".
>;
>; The DECnet FORTRAN/COBOL/BASIC+2 object library will be placed on your
>; target disk as "DL00:[1,1]NETFOR.OLB".
>;
>; If necessary, please move them to  the  library  disk  (LB:)  on  your
>; target system, if this is different from your target disk (DL00:).
>;
>;
>; =====================================================================
>;  DEC - Section  2 - Define the DECnet Communications Components
>; =====================================================================
>;
>; Creating build files for NSP, the network services process and driver.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDDEC.DAT;*/DE/NM,DECCOM.COM;*
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]NSPBLD.CMD/PU/NM,NSPASM.CMD
$STOP/ID=0
>; Creating build files for NETACP, the network services ACP.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
>; The general delivery queue timeout will be 30 seconds.
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]NETACPBLD.CMD/PU/NM
$STOP/ID=0
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDDEC.CMD=DL00:[006,001]NETBLDDEC.DAT/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]DECGEN.GEN=DL00:[006,001]DECCOM.COM/AP/NM
$STOP/ID=0
>;
>; =====================================================================
>;  DEC - Section  3 - Define the DECnet Network Management Components
>; =====================================================================
>;
>; Creating build files for NICE, the  network  information  and  control
>; server task.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDDEC.DAT;*/DE/NM,DECCOM.COM;*
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,010]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,010]NICPRM.MAC/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]NICEASM.CMD/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]NICEBLD.CMD/PU/NM
$STOP/ID=0
>; Creating build files for MIR, the loop test mirror task.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]MIRBLD.CMD/PU/NM
$STOP/ID=0
>; Creating build files for EVP, the routing event processing task.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]EVPBLD.CMD/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDDEC.CMD=DL00:[006,001]NETBLDDEC.DAT/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]DECGEN.GEN=DL00:[006,001]DECCOM.COM/AP/NM
$STOP/ID=0
>;
>; =====================================================================
>;  DEC - Section  4 - Define the DECnet Satellite Support Components
>; =====================================================================
>;
>; SLD cannot be built for the target RSX-11S system.  The target  system
>; was generated without remote task loading support.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]DECGEN.GEN=DL00:[006,001]DECCOM.COM/AP/NM
$STOP/ID=0
>;
>; =====================================================================
>;  DEC - Section  5 - Define the DECnet File Utilities
>; =====================================================================
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]DECGEN.GEN=DL00:[006,001]DECCOM.COM/AP/NM
$STOP/ID=0
>;
>; =====================================================================
>;  DEC - Section  6 - Define the DECnet Terminal and Control Utilities
>; =====================================================================
>;
>; Creating build files for HT: and RMHACP, the remote  network  terminal
>; driver and ACP.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDDEC.DAT;*/DE/NM,DECCOM.COM;*
$STOP/ID=0
>; RMHACP will support 4 simultaneous incoming connections.
>; HTDRV will support 4 HT: units.
! 'F$VERIFY(0)'
SET /UIC=[006,010]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,010]RMHPRE.MAC/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,024]RMHACPBLD.CMD/PU/NM,RMHACPASM.CMD
$STOP/ID=0
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETBLDDEC.CMD=DL00:[006,001]NETBLDDEC.DAT/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]DECGEN.GEN=DL00:[006,001]DECCOM.COM/AP/NM
$STOP/ID=0
>;
>; =====================================================================
>;  DEC - DECnet CEX Product Generation Procedure
>;        All questions answered at 11:27:52 on 08-DEC-82
>; =====================================================================
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETSYM.TMP;*/DE/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[137,10]
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section  8 - Complete the CEX System Definitions
>; =====================================================================
>;
>;
>; The Large Data Buffer (LDB) size will be 576. bytes.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETGEN.GEN=DL00:[006,001]NETCOM.COM/AP/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
LBR DL00:[006,001]NETS09.COM=DL01:[137,010]NETVMS.CLB/EX:NETS09
$STOP/ID=0
! 'F$VERIFY(0)'
LBR DL00:[006,001]NETS10.COM=DL01:[137,010]NETVMS.CLB/EX:NETS10
$STOP/ID=0
! 'F$VERIFY(0)'
LBR DL00:[006,001]NETSTP.COM=DL01:[137,010]NETVMS.CLB/EX:NETSTP
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section  9 - Build the CEX System at 11:28:39 on 08-DEC-82
>; =====================================================================
>;
>; All questions have now been asked and the selected components will now
>; be built.  This may take from one to three  hours,  depending  on  the
>; selection of components and the system you are running on.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,064]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,064]CETAB.MAC/AP/NM=DL00:[006,001]NETSLT.COM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,064]CETAB.MAC/AP/NM=DL00:[006,001]NETLLC.COM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,064]CETAB.MAC/AP/NM=DL00:[006,001]NETDLC.COM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,064]CETAB.MAC/AP/NM=DL00:[006,001]NETDDM.COM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,064]CETAB.MAC/AP/NM=DL00:[006,001]NETLIT.COM
$STOP/ID=0
>PIP DL00:[006,064]CETAB.MAC/PU/NM
! 'F$VERIFY(0)'
PIP DL00:[006,064]CETAB.MAC/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,064]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,064]AUX.DAT/NV=DL00:[006,001]NETAUX.COM
$STOP/ID=0
>PIP DL00:[006,064]AUX.DAT/PU/NM
! 'F$VERIFY(0)'
PIP DL00:[006,064]AUX.DAT/PU/NM
$STOP/ID=0
>;
! 'F$VERIFY(0)'
ASN/GLOBAL DL00:=OU:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL DL00:=OU0:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL DL00:=LB:
  PREVIOUS LOGICAL NAME ASSIGNMENT REPLACED
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL NL:=LS:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL NL:=MP:
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL DL01:=IN:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL DL01:=IN0:
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
>SET /UIC=[1,2]
! 'F$VERIFY(0)'
SET /UIC=[1,2]
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB/CR:10:::UNI
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB/CR:10:::UNI
$STOP/ID=0
>PIP OU:[1,2]NETHLP.ULB/PU/NM
! 'F$VERIFY(0)'
PIP OU:[1,2]NETHLP.ULB/PU/NM
$STOP/ID=0
>SET /UIC=[6,24]
! 'F$VERIFY(0)'
SET /UIC=[6,24]
$STOP/ID=0
>SET /UIC=[1,2]
! 'F$VERIFY(0)'
SET /UIC=[1,2]
$STOP/ID=0
>LBR OU:[1,2]CFE.HLP=IN:[1,2]NETHLP.HLB/EX:CF1
! 'F$VERIFY(0)'
LBR OU:[1,2]CFE.HLP=IN:[1,2]NETHLP.HLB/EX:CF1
$STOP/ID=0
>LBR OU:[1,2]CFEDEF.HLP=IN:[1,2]NETHLP.HLB/EX:CF1DEF
! 'F$VERIFY(0)'
LBR OU:[1,2]CFEDEF.HLP=IN:[1,2]NETHLP.HLB/EX:CF1DEF
$STOP/ID=0
>LBR OU:[1,2]CFELIS.HLP=IN:[1,2]NETHLP.HLB/EX:CF1LIS
! 'F$VERIFY(0)'
LBR OU:[1,2]CFELIS.HLP=IN:[1,2]NETHLP.HLB/EX:CF1LIS
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB=OU:[1,2]CFE.HLP/RP
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB=OU:[1,2]CFE.HLP/RP
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB=OU:[1,2]CFEDEF.HLP/RP
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB=OU:[1,2]CFEDEF.HLP/RP
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB=OU:[1,2]CFELIS.HLP/RP
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB=OU:[1,2]CFELIS.HLP/RP
$STOP/ID=0
>PIP OU:[1,2]CFE.HLP;*/DE/NM,CFEDEF.HLP;*,CFELIS.HLP;*
! 'F$VERIFY(0)'
PIP OU:[1,2]CFE.HLP;*/DE/NM,CFEDEF.HLP;*,CFELIS.HLP;*
$STOP/ID=0
>SET /UIC=[6,24]
! 'F$VERIFY(0)'
SET /UIC=[6,24]
$STOP/ID=0
>SET /UIC=[1,2]
! 'F$VERIFY(0)'
SET /UIC=[1,2]
$STOP/ID=0
>LBR OU:[1,2]NDA.HLP=IN:[1,2]NETHLP.HLB/EX:NDA
! 'F$VERIFY(0)'
LBR OU:[1,2]NDA.HLP=IN:[1,2]NETHLP.HLB/EX:NDA
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB=OU:[1,2]NDA.HLP/RP
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB=OU:[1,2]NDA.HLP/RP
$STOP/ID=0
>PIP OU:[1,2]NDA.HLP;*/DE/NM
! 'F$VERIFY(0)'
PIP OU:[1,2]NDA.HLP;*/DE/NM
$STOP/ID=0
>SET /UIC=[6,24]
! 'F$VERIFY(0)'
SET /UIC=[6,24]
$STOP/ID=0
>SET /UIC=[1,2]
! 'F$VERIFY(0)'
SET /UIC=[1,2]
$STOP/ID=0
>LBR OU:[1,2]VNP.HLP=IN:[1,2]NETHLP.HLB/EX:VNP
! 'F$VERIFY(0)'
LBR OU:[1,2]VNP.HLP=IN:[1,2]NETHLP.HLB/EX:VNP
$STOP/ID=0
>LBR OU:[1,2]VNPCLE.HLP=IN:[1,2]NETHLP.HLB/EX:VNPCLE
! 'F$VERIFY(0)'
LBR OU:[1,2]VNPCLE.HLP=IN:[1,2]NETHLP.HLB/EX:VNPCLE
$STOP/ID=0
>LBR OU:[1,2]VNPSET.HLP=IN:[1,2]NETHLP.HLB/EX:VNPSET
! 'F$VERIFY(0)'
LBR OU:[1,2]VNPSET.HLP=IN:[1,2]NETHLP.HLB/EX:VNPSET
$STOP/ID=0
>LBR OU:[1,2]VNPSHO.HLP=IN:[1,2]NETHLP.HLB/EX:VNPSHO
! 'F$VERIFY(0)'
LBR OU:[1,2]VNPSHO.HLP=IN:[1,2]NETHLP.HLB/EX:VNPSHO
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB=OU:[1,2]VNP.HLP/RP
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB=OU:[1,2]VNP.HLP/RP
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB=OU:[1,2]VNPCLE.HLP/RP
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB=OU:[1,2]VNPCLE.HLP/RP
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB=OU:[1,2]VNPSET.HLP/RP
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB=OU:[1,2]VNPSET.HLP/RP
$STOP/ID=0
>LBR OU:[1,2]NETHLP.ULB=OU:[1,2]VNPSHO.HLP/RP
! 'F$VERIFY(0)'
LBR OU:[1,2]NETHLP.ULB=OU:[1,2]VNPSHO.HLP/RP
$STOP/ID=0
>PIP OU:[1,2]VNP.HLP;*/DE/NM,VNPCLE.HLP;*,VNPSET.HLP;*,VNPSHO.HLP;*
! 'F$VERIFY(0)'
PIP OU:[1,2]VNP.HLP;*/DE/NM,VNPCLE.HLP;*,VNPSET.HLP;*,VNPSHO.HLP;*
$STOP/ID=0
>SET /UIC=[6,24]
! 'F$VERIFY(0)'
SET /UIC=[6,24]
$STOP/ID=0
>;
! 'F$VERIFY(0)'
ASN/GLOBAL DL01:=IN:
  PREVIOUS LOGICAL NAME ASSIGNMENT REPLACED
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL DL01:=IN0:
  PREVIOUS LOGICAL NAME ASSIGNMENT REPLACED
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
>TKB @OU:[6,24]CEXBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]CEXBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]CEX.TSK/PU/NM,CEX.STB,AUX.TSK,AUX.STB
! 'F$VERIFY(0)'
PIP OU:[6,64]CEX.TSK/PU/NM,CEX.STB,AUX.TSK,AUX.STB
$STOP/ID=0
>MAC @OU:[6,24]CETABASM.CMD
! 'F$VERIFY(0)'
MAC @OU:[6,24]CETABASM.CMD
$STOP/ID=0
>PIP OU:[6,24]CETAB.OBJ/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,24]CETAB.OBJ/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]CETABBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]CETABBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]CETAB.TSK/PU/NM,CETAB.STB
! 'F$VERIFY(0)'
PIP OU:[6,64]CETAB.TSK/PU/NM,CETAB.STB
$STOP/ID=0
>TKB @OU:[6,24]NTINITBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]NTINITBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]NTINIT.TSK/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]NTINIT.TSK/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]NCPBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]NCPBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]NCP.TSK/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]NCP.TSK/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]CFEBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]CFEBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]CFE.TSK/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]CFE.TSK/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]NDABLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]NDABLD.CMD
$STOP/ID=0
>PIP OU:[6,64]NDA.TSK/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]NDA.TSK/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]VNPBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]VNPBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]VNP.TSK/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]VNP.TSK/PU/NM
$STOP/ID=0
>;
! 'F$VERIFY(0)'
ASN/GLOBAL DL01:=IN:
  PREVIOUS LOGICAL NAME ASSIGNMENT REPLACED
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL DL01:=IN0:
  PREVIOUS LOGICAL NAME ASSIGNMENT REPLACED
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
>TKB @OU:[6,24]DMVBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]DMVBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]DMV.TSK/PU/NM,DMV.STB
! 'F$VERIFY(0)'
PIP OU:[6,64]DMV.TSK/PU/NM,DMV.STB
$STOP/ID=0
>PIP OU:[6,64]/NV=IN:[131,24]DMV.DAT
! 'F$VERIFY(0)'
PIP OU:[6,64]/NV=IN:[131,24]DMV.DAT
$STOP/ID=0
>PIP OU:[6,64]DMV.DAT/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]DMV.DAT/PU/NM
$STOP/ID=0
>PIP OU:[6,64]/NV=IN:[131,24]DMVST.DAT
! 'F$VERIFY(0)'
PIP OU:[6,64]/NV=IN:[131,24]DMVST.DAT
$STOP/ID=0
>PIP OU:[6,64]DMVST.DAT/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]DMVST.DAT/PU/NM
$STOP/ID=0
>SET /UIC=[1,1]
! 'F$VERIFY(0)'
SET /UIC=[1,1]
$STOP/ID=0
>LBR OU:[1,1]NETLIB/CR:1:0:128.:MAC=IN:[130,10]DLXDF.MAC
! 'F$VERIFY(0)'
LBR OU:[1,1]NETLIB/CR:1:0:128.:MAC=IN:[130,10]DLXDF.MAC
$STOP/ID=0
>LBR OU:[1,1]NETLIB.MLB=IN:[130,10]NETDEF.MAC,NETMAC.MAC
! 'F$VERIFY(0)'
LBR OU:[1,1]NETLIB.MLB=IN:[130,10]NETDEF.MAC,NETMAC.MAC
$STOP/ID=0
>LBR OU:[1,1]NETLIB.MLB=IN:[130,10]NFAMAC.MAC
! 'F$VERIFY(0)'
LBR OU:[1,1]NETLIB.MLB=IN:[130,10]NFAMAC.MAC
$STOP/ID=0
>PIP OU:[1,1]NETLIB.MLB/PU
! 'F$VERIFY(0)'
PIP OU:[1,1]NETLIB.MLB/PU
$STOP/ID=0
>LBR OU:[1,1]NETFOR.OBS=IN:[133,24]DAPFOR/EX
! 'F$VERIFY(0)'
LBR OU:[1,1]NETFOR.OBS=IN:[133,24]DAPFOR/EX
$STOP/ID=0
>LBR OU:[1,1]NETTMP.OBS=IN:[133,24]DAPTRC/EX
! 'F$VERIFY(0)'
LBR OU:[1,1]NETTMP.OBS=IN:[133,24]DAPTRC/EX
$STOP/ID=0
>LBR OU:[1,1]NETFOR/CO:1:256.:128.=IN:[134,24]NETFOR.OLB
! 'F$VERIFY(0)'
LBR OU:[1,1]NETFOR/CO:1:256.:128.=IN:[134,24]NETFOR.OLB
$STOP/ID=0
>LBR OU:[1,1]NETFOR/IN=OU:[1,1]NETFOR.OBS
! 'F$VERIFY(0)'
LBR OU:[1,1]NETFOR/IN=OU:[1,1]NETFOR.OBS
$STOP/ID=0
>LBR OU:[1,1]NETFOR/IN/-EP=OU:[1,1]NETTMP.OBS
! 'F$VERIFY(0)'
LBR OU:[1,1]NETFOR/IN/-EP=OU:[1,1]NETTMP.OBS
$STOP/ID=0
>LBR OU:[1,1]NETFOR/DG:$MBLUN:$ASTBL:$ASTLU
! 'F$VERIFY(0)'
LBR OU:[1,1]NETFOR/DG:$MBLUN:$ASTBL:$ASTLU
Entry points deleted:
$MBLUN
$ASTBL
$ASTLU
$STOP/ID=0
>PIP OU:[1,1]NETFOR.OBS;*/DE,NETTMP.OBS;*
! 'F$VERIFY(0)'
PIP OU:[1,1]NETFOR.OBS;*/DE,NETTMP.OBS;*
$STOP/ID=0
>PIP OU:[1,1]NETFOR.OLB/PU
! 'F$VERIFY(0)'
PIP OU:[1,1]NETFOR.OLB/PU
$STOP/ID=0
>SET /UIC=[006,024]
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
>PIP OU:[006,024]/NV=IN:[137,24]NTEST.CMD
! 'F$VERIFY(0)'
PIP OU:[006,024]/NV=IN:[137,24]NTEST.CMD
$STOP/ID=0
>PIP OU:[006,024]NTEST.CMD/PU/NM
! 'F$VERIFY(0)'
PIP OU:[006,024]NTEST.CMD/PU/NM
$STOP/ID=0
>SET /UIC=[006,064]
! 'F$VERIFY(0)'
SET /UIC=[006,064]
$STOP/ID=0
>PIP OU:[006,064]/NV/CO=IN:[133,54]DTS.TSK,DTR.TSK
! 'F$VERIFY(0)'
PIP OU:[006,064]/NV/CO=IN:[133,54]DTS.TSK,DTR.TSK
$STOP/ID=0
>PIP OU:[006,064]DTS.TSK/PU/NM,DTR.TSK
! 'F$VERIFY(0)'
PIP OU:[006,064]DTS.TSK/PU/NM,DTR.TSK
$STOP/ID=0
>SET /UIC=[006,024]
! 'F$VERIFY(0)'
SET /UIC=[006,024]
$STOP/ID=0
>MAC @OU:[6,24]NSPASM.CMD
! 'F$VERIFY(0)'
MAC @OU:[6,24]NSPASM.CMD
$STOP/ID=0
>PIP OU:[6,24]NSPTAB.OBJ/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,24]NSPTAB.OBJ/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]NSPBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]NSPBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]NSP.DAT/NV=IN:[131,24]NSP.DAT
! 'F$VERIFY(0)'
PIP OU:[6,64]NSP.DAT/NV=IN:[131,24]NSP.DAT
$STOP/ID=0
>PIP OU:[6,64]NSP.TSK/PU/NM,NSP.STB,NSPTAB.TSK,NSPTAB.STB,NSP.DAT
! 'F$VERIFY(0)'
PIP OU:[6,64]NSP.TSK/PU/NM,NSP.STB,NSPTAB.TSK,NSPTAB.STB,NSP.DAT
$STOP/ID=0
>TKB @OU:[6,24]NETACPBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]NETACPBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]NETACP.TSK/PU/NM,NETACP.STB
! 'F$VERIFY(0)'
PIP OU:[6,64]NETACP.TSK/PU/NM,NETACP.STB
$STOP/ID=0
>MAC @OU:[6,24]NICEASM.CMD
! 'F$VERIFY(0)'
MAC @OU:[6,24]NICEASM.CMD
$STOP/ID=0
>PIP OU:[6,24]NICPRM.OBJ/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,24]NICPRM.OBJ/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]NICEBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]NICEBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]NICE.TSK/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]NICE.TSK/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]MIRBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]MIRBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]MIR.TSK/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]MIR.TSK/PU/NM
$STOP/ID=0
>TKB @OU:[6,24]EVPBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]EVPBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]EVP.TSK/PU/NM
! 'F$VERIFY(0)'
PIP OU:[6,64]EVP.TSK/PU/NM
$STOP/ID=0
>MAC @OU:[6,24]RMHACPASM.CMD
! 'F$VERIFY(0)'
MAC @OU:[6,24]RMHACPASM.CMD
$STOP/ID=0
>PIP OU:[6,24]RMHACP.OBJ/PU/NM,HTTAB.OBJ
! 'F$VERIFY(0)'
PIP OU:[6,24]RMHACP.OBJ/PU/NM,HTTAB.OBJ
$STOP/ID=0
>TKB @OU:[6,24]RMHACPBLD.CMD
! 'F$VERIFY(0)'
TKB @OU:[6,24]RMHACPBLD.CMD
$STOP/ID=0
>PIP OU:[6,64]RMHACP.TSK/PU/NM,HTDRV.TSK,HTDRV.STB
! 'F$VERIFY(0)'
PIP OU:[6,64]RMHACP.TSK/PU/NM,HTDRV.TSK,HTDRV.STB
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL =OU:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL =OU0:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL =LB:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL =LS:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL =MP:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL =IN:
$STOP/ID=0
! 'F$VERIFY(0)'
ASN/GLOBAL =IN0:
$STOP/ID=0
>;
>; =====================================================================
>;  NET - Section 10 - Generation Clean Up
>; =====================================================================
>;
>; Creating NETCFG.TXT, the network configuration description file.
>; Creating NETCFE.CMD, the network configuration command file.
>; Creating NETINS.CMD, the network installation command file.
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETINS.CMD=DL00:[006,001]NETINS.001,NETINS.002,NETINS.003
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETINS.CMD/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETINS.001;*/DE/NM,NETINS.002;*,NETINS.003;*
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETCFE.CMD/AP/NM=DL00:[006,001]DECCFE.COM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETCFE.CMD/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETCFG.TXT/AP/NM=DL00:[006,001]NETDDC.COM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETCFG.TXT/AP/NM=DL00:[006,001]DECCFG.COM
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]NETCFG.TXT/PU/NM
$STOP/ID=0
>;
>; The network HELP file library has been placed on your target disk, as:
>;
>;	DL00:[1,2]NETHLP.ULB
>;
>; This file should be moved to your target systems library device (LB:).
>;
>;
>; =====================================================================
>;  NET - RSX-11S CEX System Generation Procedure
>;        Stopped at 12:00:27 on 08-DEC-82
>; =====================================================================
>;
! 'F$VERIFY(0)'
SET /UIC=[006,001]
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]*.DAT;*/DE/NM,*.COM;*,*.001;*,*.002;*,*.003;*
$STOP/ID=0
! 'F$VERIFY(0)'
PIP DL00:[006,001]*.*/PU/NM
$STOP/ID=0
! 'F$VERIFY(0)'
SET /UIC=[137,10]
$STOP/ID=0
>@ <EOF>
>