Microsoft Product Support Services   All Products  |   Support  |   Search  |   microsoft.com Home  
microsoft.com
  Support Home  |   Find a Solution  |   Request Support  |   Custom Support  |

INFO: Direct Drive Access Under Win32


The information in this article applies to:
  • Microsoft Win32 Application Programming Interface (API), used with:
    • The Microsoft Windows NT operating system, versions 3.1, 3.5, 3.51, 4.0
    • The Microsoft Windows 2000 operating system


SUMMARY

To open a physical hard drive for direct disk access (raw I/O) in a Win32-based application, use a device name of the form

\\.\PhysicalDriveN
where N is 0, 1, 2, and so forth, representing each of the physical drives in the system.

To open a logical drive, direct access is of the form
\\.\X:
where X: is a hard-drive partition letter, floppy disk drive, or CD-ROM drive.


MORE INFORMATION

You can open a physical or logical drive using the CreateFile() application programming interface (API) with these device names provided that you have the appropriate access rights to the drive (that is, you must be an administrator). You must use both the CreateFile() FILE_SHARE_READ and FILE_SHARE_WRITE flags to gain access to the drive.

Once the logical or physical drive has been opened, you can then perform direct I/O to the data on the entire drive. When performing direct disk I/O, you must seek, read, and write in multiples of sector sizes of the device and on sector boundaries. Call DeviceIoControl() using IOCTL_DISK_GET_DRIVE_GEOMETRY to get the bytes per sector, number of sectors, sectors per track, and so forth, so that you can compute the size of the buffer that you will need.

Note that a Win32-based application cannot open a file by using internal Windows NT object names; for example, attempting to open a CD-ROM drive by opening

\Device\CdRom0
does not work because this is not a valid Win32 device name. An application can use the QueryDosDevice() API to get a list of all valid Win32 device names and see the mapping between a particular Win32 device name and an internal Windows NT object name. An application running at a sufficient privilege level can define, redefine, or delete Win32 device mappings by calling the DefineDosDevice() API.

Additional query words:

Keywords : kbAPI kbFileIO kbKernBase kbOSWin2000 kbDSupport kbGrpKernBase
Issue type : kbinfo
Technology : kbOSWinNT kbOSWinSearch


Last Reviewed: October 25, 2000
© 2001 Microsoft Corporation. All rights reserved. Terms of Use.


Article ID: Q100027

Last Reviewed:
October 25, 2000

Send to a friend

Provided by
Microsoft Product Support Services


Did the information in this article help answer your question?

Yes
No
Did not apply

Please provide additional comments about this information.
(255 character max)