From: Leo Demers [leo_dot_demers@HP_dot_com]
Sent: Thursday, March 06, 2003 1:08 PM
To: Info-VAX@Mvb.Saic.Com
Subject: Re: Questions on SSH for VMS

Folks this will be up on the webpage shortly put it can't hurt to have it in
two places.

  - Leo

INSTALLATION NOTE:

Corrections for Installing hp TCP/IP Services for OpenVMS SSHv2 EAK

Description:

After installing the SSHv2 EAK, perform the following steps:

1. The SSHv2 EAK kit fails to extract the updated templates text library
(TCPIP$TEMPLATES.TLB) from the kit. To correct this:

a. Extract the updated template text library from the SSHv2 EAK kit:

$ PRODUCT EXTRACT FILE TCPIP_SSH /SELECT=TCPIP$TEMPLATES.TLB_SSH

b. Copy the templates text library:

$ COPY TCPIP$TEMPLATES.TLB_SSH SYS$COMMON:[SYSLIB]TCPIP$TEMPLATES.TLB



2. The updated TCPIP$UCP.EXE image must be installed as a known image before
any SSHv2 EAK components can be configured using the TCPIP$CONFIG.COM
command procedure.

To install the updated TCPIP$UCP.EXE image, choose one of the following
methods:

· On systems where network availability is not critical:

$ @SYS$STARTUP:TCPIP$SHUTDOWN.COM
$ @SYS$STARTUP:TCPIP$STARTUP.COM

or

· On systems where network availability is critical:

$ INSTALL REPLACE SYS$COMMON:[SYSEXE]TCPIP$UCP.EXE
$ INSTALL REPLACE SYS$COMMON:[SYSMSG]TCPIP$MSG.EXE


--
Leo Demers
OpenVMS Security Product Manager
Leo_dot_Demers_at_HP_dot_COM
<dittman@dittman.net> wrote in message
news:kmt9a.27992$ES3.3388@nwrddc04.gnilink.net...
> Dirk Munk <munk@home.nl> wrote:
> > If the PCSI kit is the same as we got this morning, then please be
advised that
> > there are some small errors in the installation and configuration
procedures.
> >
> > In the kit is a new version of the text library
sys$library:TCPIP$TEMPLATES.TLB,
> > it is named TCPIP$TEMPLATES.TLB_SSH. The installation procedure should
copy this
> > file as a new version to sys$library, but does not do so. You will have
to
> > extract the file from the PCSI kit by hand, and place it in sys$library.
Do this
> > before trying to configure SSH.
>
> To clarify, extract TCPIP$TEMPLATES.TLB_SSH and place it in SYS$LIBRARY
renamed
> to TCPIP$TEMPLATES.TLB
>
> > The configuration routine of the server also contains a small error. The
service
> > SSH is defined (TCPIP SET SERVICE etc.) with the option /FLAG=TCPIP.
This option
> > is invalid. Define the service manually without this option before
configuring
> > the SSH server, and all is well.
>
> I removed the /flag=tcpip from TCPIP$CONFIG.COM and that worked.
> --
> Eric Dittman
> dittman@dittman.net